Filter
Top Products
C637M-B (10/03) 11
CHANNEL A
CHANNEL B
STORAGE B
STORAGE A
RECORDER
HOST A
HOST A
SCSI CABLE
SCSI CABLE
CONNECTING TWO STORAGE UNITS TO ONE RECORDER
1. Connect a SCSI cable from Host A on Storage A to Channel A on the recorder.
2. Connect a SCSI cable from Host A on Storage B to Channel B on the recorder.
3. Plug the power cords into the units and into a universal power supply (UPS).
4. Turn on the three power supplies on the rear of each storage unit. You can turn them on in any sequence.
5. Turn on each storage unit’s main power.
6. Turn the recorder on.
Figure 6. Two Storage Unit/One Recorder Configuration