43
RQT7619
INFO
Optional connections
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
If your cable TV box or satellite receiver has an OPTICAL OUT
terminal you can connect with this unit’s OPTICAL IN terminal to
enjoy digital audio including multi-channel Dolby Digital. Refer to
your cable TV box or satellite receiver’s operating instructions for
details.
[Note]
You cannot record digital audio received using the optical
connection. Make certain to also connect to the L1 AUDIO/VIDEO
terminals when using the OPTICAL IN terminal connection.
Make the following connections in combination with connections in
Setup Guide, page 10.
Preparation
Press [HDD] or [DVD] to select “HDD” or “DVD” as the source.
1
Press [HDD/DVD INPUT] to select “L1”.
You can select the input channel by pressing [W X CH].
2 Press [SHIFT]i[L1/OPT] to select
audio input.
L1 ANALOG (factory preset): Audio input into the L1 AUDIO
f terminals is output to the
v speakers.
L1 OPT: Audio input into the L1 OPTICAL IN terminal is
output to the speakers.
∫ Audio reception setting
While “L1 OPT” is displayed on the unit’s display
Press and hold [SHIFT]r[L1/OPT].
L1 AUTO (factory preset): When receiving Dolby Digital and PCM
;: signals
L1 PCM FIX: When receiving only PCM audio
∫ When receiving Dolby Digital Dual Mono signals
You can change the audio mode.
Press [AUDIO].
MAIN()SAP
∫ Dynamic range compression
You can change this setting to listen to Dolby Digital sound at low
volume (such as late at night) and maintain audio clarity. It reduces
the peak level in loud scenes without affecting the sound field.
Press and hold [AUDIO] for about 2 seconds.
A. DR COMP OFF (factory preset): The original dynamic range.
l;
l DR COMP STD: The level recommended for household viewing.
l;
a- DR COMP MAX: The maximum allowable compression
(recommended for night viewing).
∫ Recording audio from discs or television
broadcasts to a tape deck
1 Discs: Press [HDD] or [DVD] to select “HDD” or “DVD” as the source.
Television broadcasts: Press [W X CH] to select the channel.
2 Start recording and play.
Refer to the manual of the other unit for details.
∫ To playback audio from a tape deck, etc.,
through this unit’s speakers
1 Press [HDD] or [DVD] to select “HDD” or “DVD” as the source.
2 Press [HDD/DVD INPUT] to select “L1” or “L3”.
3 Start play.
1 Press [AUX] to select “AUX” as the source.
2 Turn on the television and select the channel.
3 Adjust the volume on this unit.
≥Set TV volume minimum.
Receiving digital audio using the
optical connection
CH
VOLUME
SKIP
SLOW/SEARCH
CANCEL
123
4
5
6
789
0
HOME THEATER TV
TV/VIDEO
AUXFM/AMDVDHDD
DISPLAY
POWERPOWER
HDD/DVD
INPUT
PA G E
VCR Plus+
CH
VOLUME
SKIP
SLOW/SEARCH
CANCEL
123
5
6
789
0
HOME THEATER TV
TV/VIDEO
AUXFM/AMDVDHDD
DISPLAY
POWERPOWER
HDD/DVD
INPUT
PA G E
4
Info
MULTI REAR
DUBBING
S.POSITION
CHAPTER
C.FOCUS
AUDIO
ERASE
REC MODE
TIME SLIP
L1/OPT
MIX
2CH
REC
TEST
CM SKIP
REPEAT
MUTING
S W. LEVEL
PRO LOGIC
SHIFTSHIFT
STATUS
EQ/SFC
PROG/CHECKPROG/CHECK
TV GUIDETV GUIDE
Info
MULTI REAR
DUBBING
S.POSITION
CHAPTER
C.FOCUS
AUDIO
ERASE
REC MODE
TIME SLIP
L1/OPT
MIX
2CH
REC
TEST
CM SKIP
REPEAT
MUTING
S W. LEVEL
PRO LOGIC
SHIFTSHIFT
STATUS
EQ/SFC
PROG/CHECKPROG/CHECK
TV GUIDETV GUIDE
SHIFT
L1/OPT
AUDIO
HDD/DVD
INPUT
W X CH
AUX
VOLUME
VCR Plus+
HDD, DVD
OPTICAL
IN
VIDEO S
-
VIDEO
VIDEO S
-
VIDEO
R
-
AUDIO
-
L
VIDEO S
-
VIDEO
IN1
IN3
R
-
AUDIO
-
L
LOOP
ANT
GND
LOOP 75EXT
VIDEO S
-
VIDEO (L1)
(L3)
AM ANT FM ANT
CO
VI
(4
OPTICAL
OUT
Cable TV box or
satellite receiver
Optical digital audio cable
Do not bend sharply.
Insert fully, with this
side facing up.
When “L1 OPT” is selected
Connecting other audio equipment
FM/AM broadcasts and audio from the L1 OPTICAL IN and AUX
terminals are not output through the AUDIO OUT terminals.
Enjoying TV broadcast with surround sound
OUT1
OPTICAL
IN
R
-
AUDIO
-
L
VIDEO S
-
VIDEO
R
-
AUDIO
-
L
VIDEO S
-
VIDEO
R
-
AUDIO
-
L
VIDEO S
-
VIDEO
OUT2
IN1
IN3
R
-
AUDIO
-
L
LOOP
ANT
GND
LOOP 75EXT
VIDEO S
-
VIDEO (L1)
(L3)
A
AM ANT FM ANT
COMPO
VIDEO
(480/
R L
PLAY OUT
R L
REC IN
red white red white
red white red white
Tape deck
Audio cable
For play
For
recording
IN1 (L1)
or
IN3 (L3)
OUT1
or
OUT2
L
AUX
R
AUDIO OUT
L
R
Television
Audio cable
red
white
red
white
7619en.book 43 ページ 2004年5月6日 木曜日 午前9時33分