Filter
Top Products
41
RQT7619
SETTINGS
Refer to the control reference on page 39.
Preparation:
If the television program list has already been downloaded, return the
unit to the factory preset condition using the steps indicated below.
When the unit is on and stopped
1 Press and hold [X CH] and [W CH] on the main unit for about
five seconds.
The unit turns off.
2 Press [Í POWER] to turn the unit on.
3
Complete the TV Guide On Screen
TM
system setup (until [ENTER]
is pressed after the “Watch TV” message screen is displayed).
[Note]
You can set timer recording only manually after you set the unit with
“Auto Channel Setting”.
1 Press [FUNCTIONS].
2
Press [
3
,
4
] to select “SETUP” and press [ENTER].
3
Press [
3
,
4
] to select “Channel” and press [
1
].
4 Press [3, 4] to select “Auto Channel
Setting” and press [ENTER].
5
Press [
2
,
1
] to select “Yes” and press [ENTER].
6 Press [ENTER].
Auto Channel Setting starts.
This takes a few minutes.
The unit then proceeds with
Auto Clock Setting. The time is
displayed when finished.
≥DST, Daylight Saving Time, shows the summertime setting.
≥TIME ZONE shows the time difference from Greenwich
meantime (GMT).
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time) l GMT j6
MST (Mountain Standard Time) l GMT j7
PST (Pacific Standard Time) l GMT j8
AST (Alaska Standard Time) l GMT j9
HST (Hawaii Standard Time) l GMT j10
For other areas: xx hr
≥If the Auto Clock Setting does not start automatically, select
“Auto Clock Setting” from the “Set Up” tab.
≥If the time was not set correctly, use manual clock setting
(➡ page 7) or time zone adjust.
7 Press [ENTER].
≥The unit configures channels according to the Antenna
System settings as follows.
Tabs Menus Options (Underlined items are the factory presets.)
Audio
Continued
Speaker
Set the delay time for your center and surround speakers
Multi Channel
Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms
Surround (L/R): 0.0/5.0
/10.0/15.0 ms
Values
If distance a or b is greater than or equal to distance c, set to “0”.
If distance a or b is less than distance c, set as follows.
Display
Status Messages
Choose whether to show status messages automatically.
≥Automatic ≥Off
On-screen Language
Choose the language for these menus and on-screen
messages.
≥English
≥Español ≥Français
–Only English is displayed in the TV Guide On Screen
TM
system
regardless of the settings. Other languages cannot be displayed.
Blue Background
Select “Off” if you do not want to have the unit show the blue
background when reception is weak.
≥On
≥Off
Front Display
Changes the brightness of the unit’s display.
≥Bright
≥Dim
≥Automatic:
The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit is turned off
all displays disappear. While using this mode the standby
power consumption can be reduced.
LS
RS
L
R
SW
b
c
a
C
b Surround speakers
Difference Setting
Approx. 150 cm (5 feet) 5.0 ms
Approx. 300 cm (10 feet) 10.0 ms
Approx. 450 cm (15 feet) 15.0 ms
≥
When you change the surround speaker setting for Dolby Digital, the setting also changes for Dolby Pro Logic
II.
a Center speaker
Difference Setting
Approx. 30 cm (1 foot) 1.0 ms
Approx. 60 cm (2 feet) 2.0 ms
Approx. 90 cm (3 feet) 3.0 ms
Approx. 120 cm (4 feet) 4.0 ms
Approx. 150 cm (5 feet) 5.0 ms
TV
Screen
TV Type (➡ page 8) ≥Aspect 4:3 & 480I ≥Aspect 4:3 & 480P
≥Aspect 16:9 & 480I ≥Aspect 16:9 & 480P
4:3 TV Settings for DVD-Video
Select how DVD-Video widescreen picture is shown on a 4:3
standard aspect television.
≥Pan & Scan
:
Video recorded for a widescreen is played as Pan & Scan
(unless prohibited by the producer of the disc).
≥Letterbox:
Video recorded for a widescreen is played in the letterbox style.
4:3 TV Settings for DVD-RAM
Select how DVD-RAM widescreen picture is shown on a 4:3
standard aspect television.
≥4:3: Titles played as recorded.
≥Pan & Scan:
Video recorded for a widescreen is played as Pan & Scan.
≥Letterbox:
Video recorded for a widescreen is played in the letterbox style.
Channel/Clock settings when TV Guide On Screen
TM
system is not used
Auto channel/clock settings
SETUP
Disc
Video
Audio
Auto Clock Setting
Auto Clock Setting is complete.
4/4/2002 12:15 AM
DST............. ON
TIME ZONE.... CST
Channel
Set Up
Antenna system Band Channel
TV
VHF 2–13
UHF 14–69
CATV
VHF 2–13
CATV LOW BAND 95–99
CATV MID/SUPER BAND 14–36
CATV HYPER BAND 37–65
ULTRA BAND
66–94
100–125
SPECIAL CATV CHANNEL 1
7619en.book 41 ページ ２００４年５月６日 木曜日 午前９時３３分