Filter
Top Products
12
RQT7619
RECORDING
Recording television programs
[HDD] [RAM] [DVD-R]
≥It is not possible to record to both HDD (Hard Disk Drive) and DVD
drive simultaneously.
≥
It is not possible to record continuously from one side of a double
sided disc to the other. You will need to eject the disc and turn it over.
≥W
hen using 8 cm (3
″
) DVD-RAM, remove the disc from the cartridge.
≥
You can record up to 500 titles on HDD, 99 titles (one side) on one disc.
≥It is not possible to record CPRM (➡ page 45) protected material
onto DVD-R or 2.8 GB DVD-RAM discs.
Preparation
≥Switch [HOME THEATER, TV] to “HOME THEATER”.
≥
Press [RETURN] to exit the television program list if it is displayed on the
television. To turn off auto start up of the television program list
➡
page 19, Selecting the TV Guide On Screen
TM
system start up pattern.
1 Press [HDD] or [DVD] to select the
recording drive.
The main unit: Press [INPUT SELECTOR] several times to
select “HDD” or “DVD”.
The HDD or DVD indicator lights up on the unit.
2 If you selected the DVD drive
Press [< OPEN/CLOSE] on the main
unit to open the tray and insert a disc.
≥Press the button again to close the tray.
≥If you put a disc in while the HDD is selected, the DVD
indicator on the unit will flash while the unit reads the disc.
3 Press [WXCH] to select the channel.
To select with the numbered buttons:
≥Select the audio to record (➡ page 13).
4 Press [REC MODE] to select the
recording mode (XP, SP, LP, or EP).
≥To record sound using LPCM (XP mode only):
Set “Audio for XP Recording” to “LPCM” in the SETUP
menu. (➡ page 40)
5 Press [¥ REC] to start recording.
Recording will take place on open space on the HDD or on
disc. Data will not be overwritten.
≥You cannot change the channel or recording mode during
recording.
≥You can record while the unit is on standby for timer recording, but
once the time for the timer recording to begin is reached, any
recording taking place will stop and the timer recording will begin.
∫ To stop recording
Press [∫].
Recorded as 1 title until the position where stopped.
[HDD]
When continuously recording for long durations, titles are
automatically divided every 8 hours.
[DVD-R]
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
∫ To pause recording
Press [;].
Press again to restart recording.
(Title is not split into separate titles.)
∫ To specify a time to stop recording—One Touch
Recording
During recording
Press [¥ REC] to select the recording time.
Each time you press the button:
≥This does not work during timer recordings (➡ page 15) or while
using Flexible Recording (➡ page 14).
Off Timer
The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours
(➡ page 39, “Off Timer”).
Regarding DVD-R
≥When transferring (dubbing) a title recorded with the high speed
mode to a DVD-R, set “DVD-R High-Speed Recording” to “On”
before recording to the HDD. (➡ page 40)
≥
In order to play a DVD-R recorded using this unit on another
playback source, the disc must first be finalized (
➡
page 35).