Filter
Top Products
8
RQT5210
Listening
2
1
3
A
4
2
B
3
42 23 31
Indicates preset scan
A
Listening to radio broadcasts
Listening to programmed stations (Preset
tuning)
Make sure you have completed the procedure for “Presetting radio
broadcasts” (on page 7).
Preparation: Set [ ] to “TUNER”.
1
Press [BAND] to select “FM” or “AM”.
Every time you press the button: FM ↔ AM
2
Press [TUNE MODE] to display the preset indicator.
The unit is set to the preset tuning mode.
3
Press [–/g] or [f/+] to select the preset channel.
4
Adjust the volume.
RX-D11 only
When using the remote control
1. Press [BAND] to select “FM” or “AM”.
2. Press [3] or [4] to select the preset channel.
Using preset scan B
You can search for a station by listening to all preset channels for 8
seconds each.
Preparation: Set [ ] to “TUNER”.
Do steps 1 to 2 above.
Press and hold [–/g] or [f/+] until “PS” appears
on the display.
Preset scan starts.
Press [–/g] or [f/+] when you find the desired
channel.
Preset scan ends after searching through each preset channel once.
To stop during the process, press [–/g] or [f/+].
RX-D11 only
When using the remote control
Press [3] or [4] for [–/g] or [f/+] described above.