Filter
Top Products
11
RQT5210
Listening
A
1
B
2
3
4
5
C
5 23 1
Total play time
Total number of tracks
Play time
Track number
Program order
Specified track number
Total play time of programmed tracks
Listening to CDs
Program play
You can program up to 24 tracks.
Preparation:
•
Set [ ] to “CD”.
•
Program play cannot be used in combination with random play.
When “
” is displayed, press [CD PLAY MODE] to clear
the display.
1
Press [L CLEAR].
The total number of tracks and total play time of the CD are
displayed.
2
Press [–/g] or [f/+] to select the desired track.
3
Press [MEMORY].
“ ” is displayed.
4
Repeat steps 2 and 3 until you have programmed
all the tracks you want.
5
Press [-/ J].
Play will start in the programmed sequence.
To cancel program play:
Press [L CLEAR] in the stop mode to display “CLr”.
Pressing [CD c] will cancel program function.
When “– –:––” appears: A
This means that the total play time of the programmed tracks has
exceeded 100 minutes. Tracks can still be programmed and played.
When “FULL” appears: B
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
Memory retention of programmed tracks:
The memory retains the program even if play is stopped or the unit is
turned off.
The display “P” indicates that programming is retained in the memory.
C
To check what has been programmed:
While “P” display is on, press [–/g] or [f/+].
The display will show the track number and programmed sequence.
Notes
•
During program play, you can search forward or backward only
within the current track.
•
During program play, skipping is always in the programmed order,
whether forward or backward.