Filter
Top Products
E-58
MENU SCREEN
– Contents of the menus – (continued)
TIME CODE menu
Items Setting Contents
TC
CLEAR
NDF/DF
(NTSC)
DV TC DUP.
TC OUT
OFFSET
PAGE BACK
ⅷCANCEL
EXECUTE
NON DROP
ⅷDROP
ⅷOFF
ON
ⅷOFF
+1F
+2F
–2F
–1F
Presets the time code:
For details, please refer to Page 35 "Setting Time Codes".
Use this menu item to choose whether to clear the time code values:
CANCEL : Do not clear.
EXECUTE : clear.
Select the framing mode for the time code generator:
NON DROP
: Sets the unit to the non-drop mode. Use this set
ting when the number of frames of the time code
is important.
DROP : Sets the unit to the drop-frame mode. Use this set
ting for real-time based time codes.
Use this menu item to select the type of time code to be recorded
for DV signal input:
OFF : Records the time codes of the built-in time code
generator of the main unit.
ON : Records the time codes and user-bits input to the
DV IN terminal.
The time code framing mode automatically takes
on that of the input time code.
Use this menu item to set the timing to output time codes from the
9PIN remote terminal of the main unit to the editing remote con-
troller:
OFF : Usually, this is selected.
+1F : Sets the timing to 1 frame faster.
+2F : Sets the timing to 2 frames faster.
–2F : Sets the timing to 2 frames slower.
–1F : Sets the timing to 1 frame slower.
Return to the top MENU.