Filter
Top Products
E-46
PLAYBACK – Locate function –
Index search
This function locates and advances/rewinds to the position where the index signal is recorded.
Use the remote controller.
Ⅵ To locate an index in the forward direction vis-a-vis the
current tape position:
• Press the INDEX + button.
The index position to be located can be specified by the number
of times this button is pressed. (Max: 99)
Ⅵ To locate an index in the reverse direction vis-a-vis the
current tape position:
• Press the INDEX - button.
The index position to be located can be specified by the number
of times this button is pressed. (Max: 99)
Ⅵ When the INDEX + or INDEX - button is pressed, the unit
will fast-forward or rewind to the specified indexed po-
sition and start playing.
A.DUB
F.REV
INDEX
–
INDEX
+
PLAY
STOP
VEQ3533
REW FF
PAUSE
REC
F.ADV
INDEX –
button
INDEX +
button
INDEX+1
During index search, this message
is displayed on the monitor
(the number represents the position
of the index).
Monitor screen
Memo
• If the interval between index signals is less than 1 minute, the function
may not work well.
• The specifications for index signal recording varies with the device used.
Blank search
This function locates the unrecorded parts of the tape. Use the remote controller.