Filter
Top Products
E-18
ON-SCREEN DISPLAY
– Regarding on-screen display –
Besides E-E images and playback images, the monitor connected to the VIDEO LINE OUT terminal and S-
VIDEO OUT terminal provides the following on-screen information.
DISPLAY
BARS
MENU SEARCH+
SEARCH–
A.DUB PAUSE
SET
BLANK
STILL
MODE
VCR
POWER
/I
AUDIO
MUTING
OUT SEL.
OUT LEV.
REC
MENU
button
DISPLAY
button
–––DISPLAY–––
DISPLAY ON
COUNTER POS I . LO
W
ER-R
TIME CODE ON
VTR MODE ON
TAPE REMAIN OFF
TIME/DATE OFF
AUDIO INFO. OFF
DATE STYLE M/D/Y
TIME STYLE 24HOUR
BARS OFF
PAGE BACK
Set at ON
or AUTO
Wireless remote controller
DISPLAY menu
On-screen display Contents Method
Status display
Event display
Alarm display
It displays the setting status of date/
time, time code and VTR operation
mode.
It displays the operating status of the
blank search, index recording/search,
or the wireless remote control.
It displays alarm messages upon op-
eration errors or if the unit is in a poor
state for operation.
Main unit
Set the DISPLAY item of the DISPLAY
menu as follows:
ON : Always display. Depending
on the items, Event and
Alarm displays are shown for
about 3 seconds.
AUTO : It displays for about 4 sec-
onds after switching between
modes.
OFF : No on-screen display.
Remote controller
The display can be turned ON/OFF
with the DISPLAY button. Each time
the DISPLAY button is pressed, the
display mode changes in the follow-
ing sequence: ON (Always display)
¥AUTO ¥ OFF.
*The settings for the DISPLAY menu
items will also change accordingly.
Warning display It displays warning messages with er-
ror codes in the event of VTR anoma-
lies. (
☞
Page 62)
It is displayed automatically when
anomalies happen.
Menu display It displays the menu setting screen.
(
☞
Page 51)
Main unit
If the EJECT and STOP buttons are
pressed simultaneously while no cas-
sette is loaded, the MENU screen will
be displayed.
Remote controller
If the unit is in the STOP mode and
the MENU button is pressed, the menu
screen will be displayed.