Filter
Top Products
17
RQTC0126
∫ “AUDIO” menu
∫ “DISPLAY” menu
∫ “OTHERS” menu
§1
The original language designed on the disc is selected.
§2
Input a code number referring to the table (➜ 18).
§3
If the language selected for “AUDIO” is not available, subtitles appear in that
language (If available on the disc).
SETTING STATE Display the current setting of the items below
PCM OUTPUT
Check the digital input
limitations of the
equipment you connect
using COAXIAL terminal
and select the maximum
sampling frequency of
PCM digital output.
UP TO 48 kHz:
When connected to equipment compatible with
44.1 or 48 kHz
UP TO 96 kHz:
When connected to equipment compatible with
88.2 or 96 kHz
≥Signals from copy-protected discs are converted to
48 or 44.1 kHz.
≥Some equipment cannot handle sampling
frequencies of 88.2 kHz, even if they can handle 96
kHz. Read your equipment’s operating instructions for
details.
DOLBY DIGITAL
With COAXIAL
connections (➜ 7)
BITSTREAM
PCM
Select “BITSTREAM” when the
equipment can decode the bitstream
(digital form of multi-channel data).
Otherwise, select “PCM”. (If the
bitstream is output to the equipment
without a decoder, high levels of
noise can be output and may
damage your speakers and hearing.)
DTS
With COAXIAL
connections (➜ 7)
BITSTREAM
PCM
DYNAMIC RANGE ON: Adjusts for clarity even when the volume is low
through compressing the range of the lowest
sound level and the highest sound level.
Convenient for late night viewing. (Only works
with DOLBY DIGITAL)
OFF
SETTING STATE Display the current setting of the items below
LANGUAGE ENGLISH
SETTING STATE Display the current setting of the items below
REGISTRATION
Displays the unit’s
registration code.
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
Select “SHOW CODE” and press [ENTER].
(➜ 18, About DivX VOD content)
JPEG TIME To change the slideshow timing
1 SEC to 15 SEC (in 1 unit)
15 SEC to 60 SEC (in 5 unit)
60 SEC to 180 SEC (in 30 unit)
≥“3 SEC” is the factory preset.
FL DIMMER
Changes the
brightness of the
unit’s display.
BRIGHT
DIM
AUTO: The display is dimmed, but brightens only when you
perform some operations.
AUTO POWER OFF ON: The unit switches to standby mode after about 30
minutes in the stop mode.
OFF
QUICK SETUP Select “SET” and press [ENTER].
DEFAULTS
This returns all
values in the setup
menus to the default
settings.
Select “RESET” and press [ENTER].
The password screen is shown if “RATINGS” (➜ 16) is set.
Please enter the same password with the numbered buttons,
then press [ENTER], then turn the unit off and on again.
Changing the player settings
17
RQTC_0126_K.fm Page 17 Friday, January 19, 2007 5:12 PM