Filter
Top Products
46
English
47
CQ-VW100U
Specifications
General
¡Power supply : 12 V DC (11 V – 16 V), test
voltage 14.4 V, negative
ground
¡Current consumption : Less than 10 A (during disc
playback)
¡
Maximum power output
: 50 W x 4 ch
¡
Power output
: 20 W x 4 ch
¡Compatible speaker
impedance : 4 Ω
¡Video input signal : Composite video signal, 1.0
Vp-p (75 Ω)
¡Audio input sensitivity : 2 Vrms
¡Video output signal : Composite video signal, 1.0
Vp-p (75 Ω)
¡
Pre-Amp output voltage
:2 Vrms
¡
Pre-Amp output impedance
: Less than 600 Ω
¡Dimensions (W x H x D) : 178 x 100 x 160 mm
{7” x 3
15
/
16
” x 6
5
/
16
”}
¡Weight : 2.3 kg {5 lbs. 1 oz.}
FM stereo radio
¡Frequency range : 87.9 MHz – 107.9 MHz
¡Usable sensitivity : 12.2 dBf
¡Stereo separation : 30 dB (1 kHz)
¡S/N ratio : 62 dB
AM radio
¡Frequency range : 530 kHz – 1 710 kHz
¡Usable sensitivity : 28 dB/µV
¡Image rejection ratio : 50 dB
Audio section
¡Output voltage/
Impedance : 2 Vrms/600 Ω
¡Frequency
characteristics : 20 Hz – 20 kHz (±1 dB)
¡Dynamic range : 96 dB (during CD playback)
¡S/N ratio : 95 dB (during CD playback)
Monitor
¡Liquid crystal panel : 7” wide
¡Screen dimensions
(W x H x D) : 154 x 87 x 177 mm
{6
1
/
16
” x 3
7
/
16
” x 6
15
/
16
”}
¡Number of pixels : 336 960 pixels (234 vertical
x 480 horizontal x 3)
¡Valid pixel ratio : Over 99.99%
¡Display method : Transparent color filter for-
mat
¡Drive method : TFT (Thin Film Transistor)
active matrix format
Note:
¡Specifications and the design are subject to modification without notice due to improvements in technology.
¡Some figures and illustrations on this manual may be different from your product.
Above Specifications comply with EIA standards.
Power Output:
20 W RMS x 4 Channels at 4 Ω and ≤
1% THD+N
Signal to Noise Ratio:
80 dBA (reference: 1 W into 4 Ω)