Filter
Top Products
32
English
33
CQ-VW100U
: clears the memory to default settings.
: no memory clear.
The display returns to the previous one.
appears when
is selected.
: proceed.
: no memory clear.
Cancel
OK
Yes
Really?
No
Yes
Memory Clear
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡The ID code is not deleted by executing memory clear.
Other
Other settings
: sets to ON if your car has ACC position.
: sets to OFF if your car has no ACC posi-
tion.
default:
Note:
¡
For an ACC-equipped car, select ON. The following
functions are available.
¡
The power is turned on automatically when inserting
a disc or magazine.
¡
selection disables turning on the power of the
main unit through the remote control.
Off
On
Off
On
(Setting ACC selection ON and
OFF)
ACC Select
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
OFF
ACC
IGN
Caution
¡Be sure to select off when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.
Input
input selection
Note:
¡
If a non-Panasonic navigation system is connected to
this unit, we do not guarantee the operations of the
navigation system.
: an external device is connected to AV1.
: skips AV1.
default:
: an external device is connected to AV2.
: Select one from among NAV1, NAV2,
and NAV3 with which images are dis-
played most beautifully when a non-
Panasonic car navigation system is con-
nected.
: skips AV2.
default:
(a System Upgrade Guidebook)
Selection of the terminal that connects to the rear view
camera.
Preparation: Connect the reverse lead. (a Installation
Instructions)
: background camera view is always on
the display.
: connected to the CAMERA IN
: unconnected
default:
Note:
¡
Make sure to select when no rear view camera is
connected.
¡
The image from the rear view camera may be blurred
in the night or a dark place.
¡
CY-RC50KU is not available as a background camera.
(a System Upgrade Guidebook)
Ext. In
Off
Off
Off
On
BGC
(Rear view camera set up)
Camera
CH-C Video Input
AV2
Skip
NAV1-3
AV2
(AV2 input selection)
AV2
AV1
Skip
AV1
(AV1 input selection)
AV1