Filter
Top Products
14
CQ-VW100U
Touch Panel Operation Overview
13
English
The State of Operation Screen
❒ Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel. (a page 43)
Operation
¡Use only your fingers to operate the touch panel.
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any
hard objects.
¡Do not use a pen or other sharp implements to
operate the touch panel.
¡Do not bump the front panel.
a Failure to observe the above may damage or
break the glass on the surface of the touch
panel.
Example: DVD mode
Note
:
¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.
Prohibition
Input is not possible
because the user has
attempted to perform
an operation which is
not supported by the
disc contents.
Displays the Source Selection Screen. Displays the Setup Screen.
Screen Button
(a page 34)
(only for video source)
Source Selection Screen appears.
Touch desired source button.
Touch to quit.
Note
:
¡The screen above appears when no external device is
connected to this unit.
Source Selection Screen Setup Screen
Setup Screen appears. Select desired setting.
Setup menu, (a page 30)
Press [SRC/PWR] to change to desired
source.
Press [SETUP] to let Setup Screen appear.
Source Button
Setup Button
(Content varies with each source)
Sound Button (a page 35)
Aspect Button
(a page 34)
(only for video source)
Clock time
(a page 32)
Disc indicator (a page 19)
(Lights when a disc is loaded)