Filter
Top Products
18
CLEANING THE TAPE-
HANDLING PARTS
Dirt, dust, or particles of the tape’s coat-
ing can accumulate on the tape heads
and other parts that the tape touches.
This can greatly reduce the performance
of the CD-3327. Use the following clean-
ing procedure after every 20 hours of
operation.
1. Remove the batteries and discon-
nect the AC power cord.
2. Open the cassette compartment
door.
3. To expose the tape-handling parts,
press
PLAY on the deck and press in
on the protection tab sensor.
4. Use a cotton swab dipped in dena-
tured alcohol or tape head cleaning
solution to clean the tape guides,
record/playback head, pinch roller,
capstan, and erase head.
5. When you finish cleaning, press
STOP/EJECT on the deck and close
the cassette compartment door.
Then reconnect power.
Your local RadioShack store sells a
complete line of cassette deck cleaning
supplies.
FCC NOTICE
This system complies with the limits for
a Class B digital device as specified in
Part 15 of
FCC Rules
. These limits pro-
vide reasonable protection against ra-
dio and TV interference in a residential
area. However, your equipment might
cause TV or radio interference even
when it is operating properly. To elimi-
nate interference, you can try one or
more of the following corrective mea-
sures.
• reorient or relocate the receiving
antenna
• increase the distance between the
equipment and the radio or TV
• use outlets on different electrical cir-
cuits for the equipment and the radio
or TV
Consult your local RadioShack store if
the problem still exists
If you cannot eliminate the interference,
the FCC requires that you stop using
your CD-3327.
14-505b.fm Page 18 Wednesday, February 10, 1999 3:55 PM