Filter
Top Products
11
• After programming a sequence of
tracks, you can review the tracks
by pressing
PROGRAM/REPEAT
and then SKIP | or | .
• To add to the programmed
sequence, press
PROGRAM/
REPEAT
until you reach the end of
the program and
the next
sequence is available. Then press
SKIP | or | to find the track
you want and press
PROGRAM/
REPEAT
again to store the new
track.
5. Press
PLAY/PAUSE to play the pro-
grammed tracks in sequence.
Notes:
• Press
SKIP | and | to move
through the programmed sequence
during play.
• Press
STOP, PROGRAM/REPEAT
then PLAY/PAUSE to start playing the
sequence again from the beginning.
To clear the program from memory,
press
STOP, then either:
• open the CD door, or
•set
FUNCTION to a setting other
than
CD
CD AND CD PLAYER
CARE TIPS
Although a CD is very durable, you
should handle it with care. We recom-
mend the following precautions.
• Keep the CD in its protective case or
sleeve when you are not playing it.
• Keep the CD clean. Your local
RadioShack store sells a suitable
CD cleaner kit.
• Keep the CD dry. A drop of moisture
can act as a lens and affect the laser
beam’s focus. If the CD gets wet,
wipe it with a soft, dry cloth before
playing it.
• Do not write on either side of a CD,
especially the non-label side.
• Handle the CD by its edge to avoid
fingerprints and surface scratches,
which can prevent the laser from
accurately reading the CD. To clean
the surface, use a CD Cleaner Kit
(such as Cat. No. 42-226) or
Scratch ’n Fix (Cat. No. 42-127).
• Do not store CDs in high-
temperature, high-humidity loca-
tions.
If the CD-3327 is subjected to a sudden
shock or jolt during play, the CD’s rota-
tion speed might suddenly change, and
the music might be briefly interrupted or
the current track might start over. This is
not a malfunction.
Cautions:
• To avoid damaging the CD player,
do not place anything but a CD in
the CD compartment.
• Remove any loaded CD from the
CD player before moving the CD-
3327 to prevent damaging the CD.
14-505b.fm Page 11 Wednesday, February 10, 1999 3:55 PM