Filter
Top Products
10
Cue
To select a track before you begin play
or while a CD is paused, press
SKIP |
or | until the desired track number ap-
pears on the display. Then press
PLAY/
PAUSE
to play the track.
Repeat
You can repeatedly play one track, a
programmed sequence (see “Pro-
grammed Play”), or an entire CD.
To repeat a single track, press
PRO-
GRAM/REPEAT
during play. The REPEAT
ONE/ALL
indicator lights.
To repeat an entire CD or programmed
sequence, press
PROGRAM/REPEAT
twice during play. The REPEAT ONE/ALL
indicator blinks.
To cancel repeat play, press
PROGRAM/
REPEAT
so the REPEAT ONE/ALL indica-
tor turns off.
PROGRAMMED PLAY
You can program up to 16 tracks on a
loaded CD to play in any sequence. Fol-
low these steps to program and play a
sequence of tracks.
1. Press
PROGRAM/REPEAT before
play.
P1
(the programmed track
number) appears and the program
indicator blinks.
2. Press
SKIP | or | to find the
track you want to program into mem-
ory.
3. Press
PROGRAM/REPEAT again to
select the track. P2 appears.
4. Repeat Steps 2 and 3 for each track
you want to program.
Notes:
• From the 10th to the 16th pro-
grammed tracks, the CD-3327
displays a code instead of a track
number (as shown here).
P.0
= P10
P.a
= P11
P.b
= P12
P.c
= P13
P.d
= P14
P.E
= P15
P.F
= P16
• If you program more than 16
tracks, you replace the first previ-
ously programmed track with the
newest one.
14-505b.fm Page 10 Wednesday, February 10, 1999 3:55 PM