Filter
Top Products
13
1
Setting the correct time and date on the recorder is very important since every file recorded on
the recorder will have the date and time information as part of the file header. This will simplify
the file management aspects later on.
The hour indicator will flash automatically when you load batteries before using the
recorder for the first time, or after the recorder hasn’t been used for a long time.
Proceed from step 1.
Setting Time/Date (TIME&DATE)
Setting Time/Date (TIME&DATE)
REC button
(Accepts a choice and moves
on to the next item)
FF/REW
button
(Alters a choice)
DISPLAY
button
(Switching the
data displayed.)
1
Set the hour.
1 Press the FF button or REW button to set
the hour.
2 Press the REC button to accept the hour.
• You can choose between 12 and 24 hour
display by pressing the DISPLAY button
while setting the hour and minute.
Example: 5:45 P.M.
5:45 PM ←→ 17:45
(Initial setting)
2
Set the minute.
1 Press the FF button or REW button to set
the minute.
2 Press the REC button to accept the minute.
3
Set the year.
1 Press the FF button or REW button to set
the year.
2 Press the REC button to accept the year.