Filter
Top Products
25
2
7
Using the Variable Control Voice Actuator (VCVA)
....................................................................................................................................................
Notes
• The start/stop actuation level also varies depending on the selected microphone sensitivity mode (☞ P.22).
• If the starting level is not adjusted within 2 seconds, the display will return to the previous.
• To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is
recommended.
7
Press the REC button to start
recording.
When the sound volume is lower than
the preset threshold sound level,
recording automatically stops after 1 sec
approximately, and “STANDBY” flashes
on the display. The record/play indicator
lamp glows when recording starts and
flashes when recording pauses.
2
1
Adjust the start/stop actuation level
1
Press the FOLDER/MENU
button during recording.
The VCVA level screen displayed.
2
Press the FF or REW button to
adjust the pause sound level.
The VCVA level can be set to any of 15
different values. The higher the value, the
more sensitive the recorder to sounds. At
the highest value, even the faintest sound
will activate recording.
The VCVA pause sound level can be
adjusted according to the ambient
(background) noise.
a Level meter (varies according to the sound
volume being recorded)
b Start level (moves to the right/left according
to the set level)
AUTHOR A
1H25M01S
STANDBY
AUTHOR A
1H25M01S
VCVA LEVEL 05
a
b