Filter
Top Products
11
1
3
1
2
Inserting Batteries
Inserting Batteries
1
Lightly press down on the arrow and slide the
battery cover open.
2
Insert two AAA alkaline batteries, observing the
correct polarity.
3
Close the battery cover completely.
Replacing batteries
The battery indicator on the display changes as the batteries
lose power.
➜ ➜ ➜
When appears on the display, replace the batteries as
soon as possible.
When the batteries are too weak, the recorder shuts down
and “BATTERY LOW” appears on the display.
An optional Ni-MH Rechargeable Battery from Olympus
can be used for the recorder (☞ P.83).
....................................................................................................................................................
Notes
• Be sure to turn OFF the recorder before replacing the batteries. Removing the batteries while the recorder
is in use may corrupt the card. If you are recording into a file and the batteries run out, you will lose your
currently recorded file since the file header will not be written. It is crucial to replace the batteries when
one hash mark in shown in the battery icon.
• Be sure to replace both batteries at the same time.
• Never mix old and new batteries, or batteries of different types and/or brands.
• If it takes longer than 1 minute to replace dead batteries, you may have to reset the time when you load
fresh batteries (☞ P.13).
• Remove the batteries if you are not going to use the recorder for an extended period of time.