Filter
Top Products
18
1
EN
Setting time and date
Setting time and date [Time & Date]
+−
button
9 0 button
OK
`/
MENU
button
STOP
(4) button
Changing the time and date
5 Press the
OK
`/
MENU
or 9
button.
• [Time & Date] will appear on the
display.
• The “Hour” will flash on the display,
indicating the start of the Time and
Date setup process.
3 Press the
OK
`/
MENU
or 9
button to move the cursor to the
item to set.
• [Device Menu] will appear on the
display.
4 Press the
+
or
−
button to select
[
Time & Date
].
1 While the recorder is during
stop mode, press and hold the
OK
`/
MENU
button.
• The menu will appear on the display
(☞ P.47).
2 Press the
+
or
−
button to select
[
Device Menu
] tab.
• You can change the menu display by
moving the settings tab cursor.
While the recorder is during stop
mode, press and hold the STOP (4)
button to display the [Time & Date]
and [Remain]. If the current time and
date is not correct, set it using the
procedure below.
The following steps are the same as
Step 1 through Step 3 of “Setting time
and date [Time & Date]” (☞ P.17).
6 Press the
STOP
(4) button to close
the menu screen.