Filter
Top Products
Syn-Tech III P25 Mobile Radio
OPERATION MANUAL
680-090-2041
Version 5.0
http://www.midlandradio.com
18
4.1.5.2 Digital Transmissions
1. Press the (Power
Adjust/Mode Change) key
repeatedly until digital transmit
mode is displayed (
).
2. Check that the correct talk group ID
is selected.
3. Ensure that the channel is clear.
4. Press and hold the push to talk key (PTT). The Transmit/Receive LED will light red
while transmitting.
5. Hold the microphone approximately two inches from your mouth and speak in a
clear, normal voice. Keep the PTT switch pressed until you have finished speaking.
6. Release the PTT switch to return to standby mode and receive any reply.
Figure 4.14 – Digital transmit display