Filter
Top Products
Syn-Tech III P25 Mobile Radio
OPERATION MANUAL
680-090-2041
Version 5.0
http://www.midlandradio.com
7
3.2.11 Pound key
The # key is a multi-function key allowing selection of several functions with successive
presses. The available functions depend on analog/digital mode. In digital mode the
zone select, status set, individual call, telephone call and call alert functions may be
available. In analog mode the zone select, selective call and two tone call functions
may be available.
3.2.11.1 Switching Zones
The first press of the # key may prompt “ZONE NO:” to switch zones. The up/down
keys will scroll through the available zones. The left soft key selects the displayed zone
and the right soft key exits without changing zones.
3.2.11.2 Setting Current Status
Successive presses of the # key may prompt “CUR. STATUS:” to set the current status.
This function is only available in digital mode. The current status is used when sending
status to other users, or when other users request the current status. The current status
may also be set under MENU | STATUS | PRESENT STATUS.
Sending current status and requesting status from other users may be
disabled in radio programming. You may still set current status and
receive status messages from other users.
3.2.11.3 Entering Unacknowledged Individual Call Mode
Successive presses of the # key may prompt “INDIVIDUAL:” to enter unacknowledged
individual call mode. This function is only available in digital mode. A unit ID may be
entered or selected from the index list. Once a unit ID is selected, the radio will enter
individual call mode. The radio will transmit unit to unit calls to the entered unit ID each
time PTT is pressed. If PTT is not pressed and no signal is received the individual call
mode will time out after ten seconds.
Individual calling may be disabled by radio programming.
3.2.11.4 Initiating a Telephone Interconnect Request
Successive presses of the # key may prompt “TELEPHONE:” to initiate a telephone
call. This function is only available in digital mode. This function initiates a telephone
interconnect request on the RF subsystem.