Filter
Top Products
7
OPERATION
TO SET OR RESET THE ACTUAL TIME
Slide the TIMER switch ❶ on the rear
of the unit to the COUNTDOWN
position. Press the TIMER button ❷;
TIMER will blink and “1:00”, indicating
1 minute and 00 seconds, will appear
in the display.
2
1
1
Press the REV ❶ or FF ❷ button to set
the desired Countdown time, in minutes
and seconds. Press the TIMER button
❸ again; TIMER will appear in the
display and the timer will countdown the
preset time, then beep. Press the
TIMER button ❹ to turn off the beeping.
3
2
4
1
2
Press the SET button once; “ ” will
appear in the display.
1
Press the REV ❶ or FF ❷ button to set
the time. Press the SET button ❸ three
times to exit the Clock Set mode.
2
3
1
2
TO SET THE COUNTDOWN TIMER
The Countdown Timer will allow you to set a countdown time in minutes and
seconds and then beep when the time has elapsed.
TO CANCEL THE COUNTDOWN TIMER
While the Countdown timer is counting down, simply press the TIMER button
again to cancel.
NOTE: The maximum Countdown time is 29 minutes, 59 seconds.
MMG-CR2900.OM.QXD 9/9/02 9:22 AM Page 7