Filter
Top Products
10
OPERATION (CONTINUED)
To recall a Radio Preset, press the
RECALL button repeatedly until the
desired Radio Preset appears in the
display.
1
TO RECALL RADIO PRESETS
To change a Radio Preset, simply
tune a radio station as described on
the previous page, then press the
RADIO SET button ❶; “MEMO” will
blink in the display. Repeatedly press
the RECALL button ❷ until the desired
Radio Preset appears in the display,
then press the RADIO SET button ❶
again to memorize.
1
2
1
TO CHANGE A RADIO PRESET
Press the PLAY/PAUSE ( ) button ❶
to turn the unit on. Open the CD
compartment door by pressing the
OPEN/CLOSE button ❷. Gently press a
disc, label side up, onto the spindle and
press the OPEN/CLOSE button ❷ again
to close the CD compartment door.
2
1
1
Make sure the CD has stopped and
open the CD compartment door by
pressing the OPEN/CLOSE button.
Hold the edge of the CD and pick it
up.
1
TO INSERT A CD
TO REMOVE A CD
IMPORTANT: The power must be on to open and close the CD Compartment door.
NOTE: Once a radio frequency is selected, the display will revert to the time
display after 10 seconds.
MMG-CR2900.OM.QXD 9/9/02 9:22 AM Page 10