Filter
Top Products
Matrox TripleHead2Go – User Guide 43
Environmental
Notes
For the latest compatibility information, see the Matrox Web site
(www.matrox.com/graphics/en/support/gxm_main).
The display resolutions and refresh rates available depend on your monitor and software
monitor settings. For more information on the capabilities of your monitor, see your
monitor documentation.
TripleHead2Go Digital Edition only
– While using the DVI input connector on your
Matrox product, the highest display resolutions are available only with graphics
hardware that supports dual-link DVI.
TripleHead2Go Digital Edition only
– While using graphics hardware that supports only
single-link DVI output, the maximum display resolution is 2048 × 768 at 60 Hz in
DualHead mode and 2400 × 600 at 60 Hz in TripleHead mode.
Certain Intel® integrated chipsets aren’t supported with Matrox TripleHead2Go.
While using display resolutions above 2048 × 1536, certain graphics hardware may not
properly support 3D acceleration. For information on the capabilities of your graphics
hardware, see its documentation.
TripleHead2Go DP Edition only
– In
clone mode
, your Matrox product supports a
maximum display resolution of 2560 × 1600 while using DisplayPort output and
1920 × 1200 while using DVI output.
TripleHead2Go Digital SE
– In
clone mode
, your Matrox product supports a maximum
display resolution of 1920 × 1200.
Temperature, operational
5 to 45 ºC (41 to 113 ºF)
(near box ambient)
Temperature, non-operational
storage and transportation
-40 to 70 ºC (-40 to 158 ºF)
Humidity, operational (indoor) 20 to 80% (non-condensing)
Humidity, non-operational storage
and transportation
5% to 95% (non-condensing)
Atmospheric pressure, operational
650hPa (3,580 meters / 11,745 feet)
to 1013hPa (0 meters / 0 feet)
Atmospheric pressure,
non-operational and transportation
192hPa (12,000 meters / 39,370 feet)
to 1020hPa (-50 meters / -164 feet)