Filter
Top Products
Squeezebox™ Boom User Guide 13
pressing the wheel. For the rest of this section, we’ll refer to using the
various buttons on the remote, but you can use the navigation wheel, as
well.
You’ll see a menu giving you the choice of connecting via a wired 6.
or wireless network. Use the up and down buttons to make your
selection, and press right.
If you’re connecting to your wireless network, you will see a menu for 7.
selecting your region, and then a menu for choosing your wireless
network by name. If you are using a security-enabled wireless
network, you’ll need to enter the security key you wrote down
previously in Make A Note Of Your Network Settings. To enter each
character, use the up and down buttons to make your selection,
and press right to move to the next character. When you’ve fi nished
entering the complete security key, press right again. When
Squeezebox Boom informs you that it has connected to your wireless
network, press right to continue.
If the display informs you that Squeezebox Boom was unable to 8.
connect to your network, press left on the remote (or the back
button on the front panel) to return to the network setup menu.
Confi rm that you’ve entered your security key correctly and that
you’re connecting to the correct network. If it still can’t connect, see
the troubleshooting appendix for advice.
The next menu will ask you if you would like to obtain an IP address 9.
automatically via DHCP, or if you’d like to manually assign an IP
address to your Squeezebox Boom. The majority of home networks
use DHCP, so if you’re in doubt, select the automatic option. When it
confi rms that it has obtained an IP address, press right to advance to
the next menu.