Filter
Top Products
Bottom view of the projector
This section provides information on the tilt adjustment foot and projector lamp cover on the bottom of
the projector.
Bottom view
1Height-adjuster button Push to release height adjuster
2Height adjuster Adjusts level of projector
3Projection lamp cover Remove when changing lamp
4Tilt adjustment foot Turn to adjust the image
Remote control parts
Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluorescent
lights can disrupt remote control operation.
Ensure that nothing obstructs the path between the remote control and the projector. If the path between
remote control and the projector is obstructed, you can bounce the signal off certain reflective surfaces
such as projector screens.
The buttons and keys on the projector have the same functions as the corresponding buttons on the
remote control. This user’s manual describes the functions based on the remote control.
Attention: To reduce the risk of injury to the eyes, do not look directly into the remote control laser
light and do not point the laser light into anyone’s eyes. The remote control is equipped with a Class II
laser that emits radiation.
1-6 M500 Projector User’s Guide