Filter
Top Products
5
QUICK SETUP
Hint: Use good quality Alkaline Batteries; avoid rechargeable batteries.
1. Have the Wireless Temperature Station and temperature sensor 3 to 5 feet
apart.
2. Batteries should be out of both units for 5 minutes.
3. Place the batteries into the Temperature sensor first and next into the
Wireless Temperature Station.
4. DO NOT PRESS ANY BUTTONS FOR 5 MINUTES.
In this time the Wireless Temperature Station and the temperature sensor will begin
to communicate with each other, and the display will show both the indoor
temperature and an outdoor temperature. If the Wireless Temperature Station does
not display both temperatures after the 5 minutes, please retry the set up as stated
above. After both indoor and outdoor temperatures are displayed for 5 minutes you
can place your temperature sensor outdoors, and set your time.
The temperature sensor should be placed in a dry, shaded area (ex: under the eve
of a roof). The temperature sensor has a range of 330 feet. Any walls that the
signal will have to pass through will reduce distance. An outdoor wall or window will
have up to 20 feet of resistance and an interior wall will have up to 10 feet of
resistance. Your distance plus resistance should not exceed 330 feet in a straight
line.