Filter
Top Products
11
3. Press and release the min/max/+ button once more to return to the current
temperatures.
RESETTING THE MINIMUM AND MAXIMUM READINGS:
User may reset the minimum and maximum temperature data to the current value
by the following step:
Press and hold the min/max/+ key for about 3 seconds to reset all the minimum/
maximum data of all channels and the indoor sensor to the current values in a
single action.
ADDING ADDITIONAL REMOTE SENSORS (OPTIONAL)
The WS-9021U is able to receive signals from 2 additional temperature sensors .
The following are instructions for the set-up of temperature sensor units with the
WS-9021U. These extra sensors can be purchased through the same dealer as this
unit.
1. Remove all the batteries from the receiver and sensor(s) and wait 60
seconds. During these 60 seconds, press any button 20 times to discharge
any excess power.
2. Insert the batteries to the first temperature sensor.
3. Within 2 minutes of powering up the first sensor, insert the batteries to the
Temperature Station. Once the batteries are in place, all segments of the