Filter
Top Products
13
successfully received. If this is not happen, user shall restart the setting up
from step 1.
NOTE: You must insert the batteries into the third sensor within 45 seconds of
reception of the second sensor.
IMPORTANT: Transmission problems will arise if the setting for multiple sensors is
not followed as described above. Should transmission problems occur, it is
necessary to remove the batteries from all units and start again the set-up from
step 1.
VIEWING AND OPERATING WITH MULTIPLE REMOTE SENSOR UNITS
1. To view the temperature of a different temperature sensor unit, press the
set/ch button to select to display the outdoor temperature of the different
sensors. A shift from one channel number to the next should be observed on
the right side of the OUTDOOR LCD.
2. To view the Minimum/Maximum temperature: first select from which
temperature sensor to read data (indicated by the channel number).
Pressing and releasing the min/max/+ button will toggle through the minimum
and maximum indoor temperature, and the minimum and maximum outdoor
temperature.