Krell Industries iPod Docking Station MP3 Docking Station User Manual


 
One person can remove the KID from its shipping
box safely and easily.
1
. Open the shipping carton top flap. You see the
literature pack containing:
1 Owner’s Reference
1 Warranty Registration Card
2. Remove the literature pack and the top layer of
foam to view:
1 KID
1 Accessory tray containing:
1 AC power cord
1 KID remote control
1 CR2025 lithium battery
1 iPod-device support(under the accessory tray)
3. Face the front of the shipping box and remove
the foam insert containing the AC power cord
by pulling the insert straight out of the box.
4. Set the remote and the AC power cord aside,
for later use.
5. Insert your hands below the left and right foam
inserts surrounding the KID.
6. Lift the KID with the foam inserts straight out
of the box.
7. Place the KID on a safe, clean work surface,
on its side, resting on a foam insert.
8. Remove the other foam insert.
9. Reposition the KID on the work surface, with
the remaining attached foam insert tilted up.
10. Remove the second foam insert.
11. Remove the foam enclosing the component.
12. Place the KID on its feet, right side up, on the
work sur
face. You are now ready to affix the
iPod-device support to the chassis.
4. Insert your hands below the left and right foam
inserts surrounding the Papa Dock.
5. Lift the Papa Dock with the foam inserts
straight out of the box.
6. Place the Papa Dock on a safe, clean work
surface, on its side, resting on a foam insert.
7. Remove the other foam insert.
8. Reposition the Papa Dock on the work sur-
face, with the r
emaining attached foam insert
tilted up.
9. Remove the second foam insert.
10. Remove the foam wrapper fr
om the component.
12. Position the Papa Dock in the listening area.
UNPACK THE KID
One person can remove the Papa Dock from its
shipping box safely and easily.
1. Open the shipping carton top flap. You see a
protective cardboard sheet.
2. Remove the protective cardboard sheet to view:
1 Papa Dock
1 Accessory box containing:
1 AC power cord
1 12 VDC (12 V trigger) cable
1 T-10 Torx wrench
1 Literature pack containing the Owner’s
Reference and Warranty Registration
Car
d
3.
Remove the accessory box by pulling it
straight out of the box.
UNPACK THE PAPA DOCK
U
npacking the KID
Unpacking the Papa Dock
ITEMS
NOT IN THE SHIPPING BOX.
If any of the
items listed above are not included in the shipping
box, please contact your authorized Kr
ell dealer or
distributor
.
PACKING MATERIALS. Save all packing materi-
als. T
o ship the KID or the Pap Dock in the futur
e,
r
epack the unit in its original packaging to pr
event
shipping damage. For more information, see the
Return Authorization procedur
e, in the Ser
vice sec
-
tion of the Krell website at www.krellonline.com.
4 Krell
/Papa Dock
1