Kenwood KTC-H2A1 MP3 Player User Manual


 
Installation in a home (continued)
Here
2
Anywhere Instruction Manual
11
Installation in a home with the KPA-H2H kit (available separately)
Note: Do not put Here
2
Anywhere in the docking station until you have completed the installation.
Here
2
Anywhere Instruction Manual
10
3. Plug the AC cord into the power
supply, then plug the power supply
into the back of the cradle, as shown.
Don’t plug the AC cord into a wall out-
let until the installation is completed.
5. Due to the paths of SIRIUS satellites over the US, the best location for the antenna in your
home depends on where you live. Use the map below as a general placement guideline—
some experimentation may be needed to obtain the best results. In major US cities, you
may also be able to receive the signal from SIRIUS ground repeaters, which may allow you
to place the antenna away from a window. In all cases, since the antenna is weather-proof
if necessary you can also locate it outside, clear of any overhead obstructions. (This is
especially important if your house has an extended roof or extended window frame struc-
tures.) See pg. 25,
Antenna Signal
, for more information about using the ANTENNA SIGNAL
screen to aim the antenna.
Section 1: Place the antenna at an
EAST-FACING window
Section 2: Place the antenna
OUTSIDE, away from any over-
head obstructions
Section 3: Place the antenna at
a
WEST-FACING window
Section 4: Place the antenna at
a
NORTH- or EAST-FACING
window
Section 5: Place the antenna at
a
NORTH-FACING window
Section 6: Place the antenna at
a
WEST- or NORTH-FACING
window
1. Using the provided screw,
assemble the docking station
cradle to the base.
4. Plug the antenna into the back
of the cradle until it is firmly
seated, as shown.
2A. Plug the audio
cable’s mini
connector into the
back of the
cradle, as shown.
2B. Plug the audio
cable’s white
(L ch,) and red
(R ch.) connectors
into your audio
system.
1 2 3
4 5 6