Filter
Top Products
Here
2
Anywhere Instruction Manual
7
Here
2
Anywhere Instruction Manual
6
Installation in a vehicle (continued)
5. Plug the cigarette lighter adapter
into the back of the cradle, as shown.
Don’t plug the adapter into the ciga-
rette lighter until the installation is
completed (see pg. 8, Step 4).
Installation in a vehicle with the KPA-H2C kit (available separately)
Note: Do not put Here
2
Anywhere in the docking station until you have completed the installation.
4. Using the provided screw,
assemble the docking station
cradle to the base.
2. You can bend the leaves on the base to
conform to curved mounting surfaces.
3. Peel the covering away from the adhesive on
the bottom of the base and adhere it to the
mounting surface. Use the provided screws
to securely attach the base to the surface.
• If using screws, be sure that you do not
damage wiring or other systems on the
other side of the mounting surface.
1. Determine where you want to mount
Here
2
Anywhere.
• Do not install Here
2
Anywhere where
it may obstruct your view through
the windshield or your view of your
vehicle’s indicator displays.
• Do not install Here
2
Anywhere where
it will hinder your access to the
vehicle’s controls.
• Do not install Here
2
Anywhere where
it may hinder the function of safety
devices such as an airbag. Doing so
may prevent the air-bag from func-
tioning properly in the event of an
accident.
• Find a location that provides good
visibility of and access to
Here
2
Anywhere’s front panel.
• Kenwood strongly recommends that
you mount Here
2
Anywhere in a
location where the base can be
attached with the provided screws.
6A. Plug the cassette adapter
into the back of the cradle,
as shown.
6B. If your car stereo has an aux input, plug
the supplied audio cable into the back
of the cradle instead of the cassette
adapter. Plug the audio cable’s white
(L ch,) and red (R ch.) connectors into
your car stereo.