Filter
Top Products
Troubleshooting Guide (continued)
Specifications:
Audio output (100 ~ 250 ohms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .950mV RMS
Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3A fast blow
Power supply requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 ~ 16V, negative ground
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5”(W) x 4
5
/16”(D) x 1
3
/4”(H)
Here
2
Anywhere Instruction Manual
27
Troubleshooting guide
Here
2
Anywhere Instruction Manual
26
Problem Possible Cause Solution
No power on Here
2
Anywhere (power
indicator /display not illuminated)
Power supply/cigarette lighter
adapter not properly connected
Blown fuse in cigarette lighter
adapter
Make sure power supply/adapter
is properly connected
Check the fuse; if blown, replace
with supplied spare fuse
No sound
Audio cable/cassette adapter not
properly connected
Make sure cable/adapter is
properly connected
Display reads “Acquiring Signal”
Signal is weak or can’t be found
Check the Antenna Signal screen
(see page 25); Change the
antenna/vehicle location to
maximize signal quality
Display reads “Antenna Error”
The antenna is not connected
The antenna or cable is faulty
Verify antenna connections
Replace antenna
Display reads “Call 1-888-539-SIRIUS to
Subscribe”
SIRIUS subscription has not been
activated
Call SIRIUS to activate your
subscription
Display reads “Invalid Channel” Stream entered is invalid Select a different SIRIUS stream
Problem Possible Cause Solution
Here
2
Anywhere operates
erroneously
Microprocessor error
Turn the power off (press the
POWER button), wait 5 – 10
seconds, then turn the power on
again.
Turn the unit’s power off, remove
it from the dock, wait 5 – 10
seconds, replace it in the dock
and turn the power back on.
If the problem persists, consult
your Kenwood dealer.