Kenwood KTC-H2A1 MP3 Player User Manual


 
2. When the desired preset bank is displayed, use the “1” – “6” buttons to tune the desired preset stream
Searching for a stream preset (Preset List Screen)
There are two ways you can search for a stream preset.
For both, hold the PRE button for at least 1 second to
enter the Preset Tune mode. The Normal Operation
Screen will change so that the preset bank and
preset number will be highlighted (top, right).
Option 1: Use the up & down arrow buttons to move
through the presets. Each time you change a
preset its number will appear on the display
and the stream will play.
Option 2: Press the SELECT button. The Preset List
Screen will appear on the display, listing all
of the stream presets that have been pro-
grammed (bottom, right)
• Use the cursor up & down buttons to scroll
through the list. Press the SELECT button
when the desired stream is highlighted on
the display to select it.
In either mode, when you’re finished searching for a
preset, press the POWER button to exit and return to the Normal Operation Screen.
Here
2
Anywhere Instruction Manual
19
• After you make your selection, the display will revert to the Normal Operation screen
Note: In the Stream List, Artist List and Song List modes, if you don’t want to make a selection, press the
POWER button to exit the mode and return to the Normal Operation screen for the active stream.
Setting/using stream presets
Setting stream presets
You can store up to 24 of your favorite streams as presets, for
quick access. Presets are stored in 4 banks, each containing
6 stream presets.
1. Press the PRE (Preset) button to activate the preset bank
you want. The selected bank is shown in the lower left
corner of the Normal Operation Screen (right).
2. Select the stream you want to preset (see Basic Operation and Selecting Music, pg. 15–16)
3. Hold the number button you want to store the stream in for at least 2 seconds
• The selected preset number will flash and then remain lit on the display to show that it has been memorized.
• If the preset button already has a stream stored in it, it will be replaced with the new stream
Tuning stream presets
The 6 presets in the active bank can be selected by pressing the “1” – “6” buttons
1. Press the PRE button to cycle through the four banks of preset stations. The display will show the
current preset bank and active preset number in the lower left corner.
Here
2
Anywhere Instruction Manual
18
Preset List Screen
Normal Operation Screen, showing
Preset Bank and Preset Number
Readout
Preset Tune Screen