Filter
Top Products
DV-705/DVF-R5070 (EN/K,P,E,Y)
Set Up functions
17
Preparations
Progressive Mode (For U.S.A., Canada and U.S. Military)
Color Scheme
Custom Color
AUTO
WEAVE
BOB
Standard
Best
This mode is an experienced combination of contrast, color, luminance.
Soft
Sharp
Customed
Video output (For Europe)
Video Set up
TV Screen
This sets the screen size (4:3 or 16:9 aspect ratio) according to the connected TV.
The method for conversion of an interlaced signal to a progressive signal can be selected.
Color adjustment can be performed.
4 : 3 PS
4 : 3 LB
Choose this setting if you want the movie to fill the entire screen of your TV. You won't see part of
the picture (particularly the right and left edge).
Some disc produced in a wide screen format can t be cropped in this fashion, which means the
black bars would appear at the top and the bottom of the screen.
Choose this setting if you would prefer to see movies in their original aspect ratio. You will see the
entire frame of the movie, but it will occupy a smaller portion of the screen. This setting may result
in the movie appearing with black bars at the top and bottom of the screen.
16 : 9
Choose this setting if your DVD player is connected to a widescreen TV.
Switching between WEAVE and BOB shown below is done automatically according to the video
contents of the disc.
This method combines two fields to convert them to one frame. This is effective for playback of
animations created on a computer etc.
This method interpolates the missing lines above and below a field for conversion to a single frame.
This is effective for images other than those for which the above WEAVE is recommended.
This is the standard setting.
A soft coloring will be obtained.
A sharp coloring will be obtained.
Chose this setting to use values set in detail for a custom color setting.
Fine setting of the color composition elements is possible.
Fine adjustment is possible for brightness, contrast, saturation, and sharpness.
Choose "S-VIDEO" in case of connection to the S-VIDEO terminals on the rear, choose "RGB" in case of connection to
the AV terminal. Output will not be made to the not selected terminals (!) ( S-VIDEO )