Filter
Top Products
11
Preparations
DV-705/DVF-R5070 (EN/K,P,E,Y)
System Connections
Caution:
Do not plug in the power lead until all connections are com-
pleted.
Make connections as shown below.
When connecting the related system components, re-
fer also to the instruction manuals of the related com-
ponents.
Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of the unit.
÷ Leave some space around the unit (from the largest outside dimension including projection) equal to or greater than, shown below.
Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm
Malfunction of microcomputer
CAUTION
If operation is not possible or erroneous display appears even though
all connections have been made properly, reset the microcomputer
referring to "In case of difficulty". t
AV
Connecting to a TV with video (composite) input terminal
Connecting to a TV with S-video input terminal
S-video cord
Audio cord
TV
TV
Audio video cord
Audio video cord
TV
(For Europe) (For other countries)
AV
Audio cord
TV
S-video cord
(For Europe ) (For other countries)
Connecting to a TV with SCART input terminal (For Europe )
AV
TV
SCART cable
DTS disclaimer clause
When playing DTS-encoded (CDs, LDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid pos-
sible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player
is connected to an amplification system.
To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to
the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.