Filter
Top Products
48
XV-1000BK
E30580-2531A
Selecting Preferences
MONITOR TYPE
You can select a monitor type when you playback DVD discs recorded for wide
screen televisions.
If your television has a normal (4:3) screen, select “4:3 PS ” (cuts both sides of
the “wide” picture) or “4:3 LB ” (with masking bars to maintain the “wide”
aspect ratio).
[on DVD disc]
[4:3 (normal) television screen]
[16:9 wide television screen]
converted and output
squeezed recording
letter box conversion
pan scan conversion
If your television has a wide (16:9) screen, you have to select “16:9 WIDE”.
DIGITAL AUDIO OUTPUT
To connect the XV-1000BK digital output with an external amplifier or receiver
equipped with an optical digital input, this item must be set correctly.
PCM ONLY: to connect to an optical input of an audio equipment.
PCM/AC-3: to connect to a Dolby AC-3 optical digital input of a Dolby
Digital AC-3 decoder.
The following chart shows the relationship between kinds of playback discs and
output signals.
Playback discs Output Output
(PCM/AC-3 mode) (PCM ONLY
mode)
DVD with 48-kHz, 16-bit linear PCM 48-kHz, 16-bit linear PCM ←
DVD with 48-kHz, 20/24-bit linear PCM 48-kHz, 20-bit linear PCM ←
DVD with 96-kHz, linear PCM no output ←
DVD with Dolby AC-3 AC-3 bitstream 48-kHz,
16-bit
linear
PCM
DVD with MPEG audio 48-kHz, 16-bit linear PCM ←
CD 44.1-kHz, 16-bit linear PCM ←
Video CD 44.1-kHz, 16-bit linear PCM ←
AV COMPULINK MODE
If you use the AV Compulink system, you must set this item correctly.
Select from the three options: DVD1, DVD2 and DVD3 according to the equipment
to be connected.
See “AV Compulink system” on pages 54 and 55.