Filter
Top Products
36
77
77
7 Erasing tracks (only for CD-RW)—Track Erase
Before finalizing a disc, you can erase recorded tracks—from
a selected track up to the last track—on a CD-RW at a time.
• To erase recorded tracks on a finalized CD-RW, unfinalize
the disc first (see page 34).
IMPORTANT
• Once erasure is performed, erased data cannot be
restored.
• When you unplug the power cord or when a power failure
occurs while “ERASE TRACK” is flashing on the display,
the disc may not be utilized any more.
1
Load an unfinalized disc on the CD Recorder
disc tray.
The total recorded track numbers and total playing time
are shown on the display.
2
While 3-CD Changer and CD Recorder are in stop
mode, press MENU.
3
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control until “TRACK ERASE”
appears on the display, then press SET.
The following message appears on the display.
• To cancel the erasing, press CANCEL.
4
Turn MULTI JOG ¢ / 4 on the unit or press
cursor 3 or 2 on the remote control to select
erasure start track, then press SET.
All the tracks between the selected track and the last one
are erased.
• The erased track numbers go off from the track
numbers indicators on the display.
Skip-marked tracks can also be erased.
77
77
7 Erasing all tracks (only for CD-RW)—Disc Erase
You can erase all the recorded tracks—whether or not
finalized—on a CD-RW at a time.
IMPORTANT
• Once erasure is performed, erased data cannot be
restored.
• When you unplug the power cord or when a power failure
occurs while “ERASE DISC” is flashing on the display, the
disc may not be utilized any more.
1
Load a recorded disc on the CD Recorder disc
tray.
The all recorded track numbers and total playing time are
shown on the display.
2
While 3-CD Changer and CD Recorder are in stop
mode, press MENU.
3
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control until “DISC ERASE”
appears on the display, then press SET.
“ERASE DISC?” appears on the display.
• To cancel the setting, press CANCEL.
4
Press SET again.
The erasure starts. The REC indicator lights up, and the 3
indicator and “ERASE DISC” start flashing on the display.
• Erasure requires a few minutes to complete. When
erasure is done, “BLANK DISC” appears on the display.
Last recorded
track number
Erasing from this
track number
COMPACT
DIGITAL AUDIO
Recordable
ReWritable
COMPACT
DIGITAL AUDIO
XL – R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER
On the unit: Remote control:
C
A
N
C
E
L
R
E
C
S
O
U
R
C
E
D
I
S
P
L
A
Y
M
E
N
U
1
PLAY
CD REC CD EDIT SYNCHRO FADE
REC
PITCH 0
FINALIZE
MODE
SET
GROUP
REPEAT CD CDR
4
7
10
2
5
8
3
6
9
10
GROUP
CONTROL
GROUP
CANCEL
CANCEL
SET
MENU
MENU
SET
3 / 2
MULTI JOG
¢ / 4
CD Recorder
disc tray