Filter
Top Products
22
1
Load a recordable CD-R or CD-RW onto the CD
Recorder disc tray.
2
Press REC SOURCE SELECTOR on the unit or
REC SOURCE on the remote control to select a
source to record from.
Selected recording source lamp on the unit lights up.
• Each time you press the button, the following recording
sources appear:
OPTICAL IN :Records through the DIGITAL IN/
OPTICAL terminal (digital recording).
The DIGITAL lamp lights up.
COAXIAL IN :Records through the DIGITAL IN/
COAXIAL terminal (digital recording).
The DIGITAL lamp lights up.
CD DIGITAL :Records from 3-CD Changer (digital
recording). The CD lamp lights up.
Prepare discs on the 3-CD Changer
disc trays.
CD ANALOG :Records from 3-CD Changer (analog
recording). The CD lamp lights up.
Prepare discs on the 3-CD Changer
disc trays.
LINE IN :Records through the LINE IN (REC)
jacks (analog recording). The LINE
lamp lights up.
MIC IN :Records through the MIC jack (analog
recording). The MIC lamp lights up.
CD+LINE MIX :See page 32.
CD+MIC MIX :See page 32.
LINE+MIC MIX :See page 32.
3
Press ¶ REC/REC MUTING.
The unit enters recording pause. The remaining time of
CD-R or CD-RW is shown on the display. The 8 and REC
indicators light up on the display.
• If OPC (see page 42) is being performed, “UPDATE
OPC” flashes on the display.
On the unit:
Remote control:
Recording Manually—Standard Recording
You can use this method to record any sources and to record any combination of two sources.
IMPORTANT
When using operating buttons (3, 7, 8) on the remote control, check which indicator lights up on the display—CD PLAYER (3-CD
Changer) or CD RECORDER. If the incorrect indicator is lit, press CONTROL CD or CONTROL CDR to select the correct target source.
4
Adjust the recording level when recording from
an external component connected to the LINE IN
and MIC jacks (see page 23 for details).
• Recording level adjustment is stored until you change
the recording source.
5
Start recording.
When recording from 3-CD Changer:
1) Press PLAY 3 for CD Recorder on the unit or
3 on the remote control.
Recording starts. The 3 and REC indicators light up
on the display.
• Pressing ¶ REC/REC MUTING also starts recording.
2) Press one of the disc number buttons (CD1,
CD2, CD3) you want.
When recording from another source:
1) Press PLAY 3 for CD Recorder on the unit or
3 on the remote control.
Recording starts. The 3 and REC indicators light up
on the display.
• Pressing ¶ REC/REC MUTING also starts recording.
2) Start playback of the external components.
COMPACT
DIGITAL AUDIO
Recordable
ReWritable
MIN MAX
COMPACT
DIGITAL AUDIO
C
A
N
C
E
L
R
E
C
S
O
U
R
C
E
D
I
S
P
L
A
Y
M
E
N
U
1
CD1 CD2 CD3
STANDBY/ON
PLAY
CD REC CD EDIT SYNCHRO FADE
REC
PITCH 0
PITCH
FINALIZE
REC MUTING
MODE
SET
GROUP
REPEAT CD CDR
4
7
10
2
5
8
3
6
9
10
GROUP
CONTROL
GROUP
EJECT 0
STOP 7
¶ REC/REC
MUTING
¶ REC/REC
MUTING
7
3
15
10
5
14
9
4
13
8
3
17
12
7
2
16
11
6
1
44.1kHz
AUTO TRACK
L
0
R
3
dB
61015203040
ANALOG
CD-R
CD PLAYER
REC
1
2
3
Signal type
(analog or digital)
Paying time
of 1st track
All track numbers of the selected disc
CD-R or CD-RW
remaining time
EX.: When selecting “CD ANALOG” as a recording
source.
Recording
source lamps
PLAY 3
8
Disc number
buttons
CD Recorder
disc tray
Disc number
buttons
REC SOURCE
REC SOURCE
SELECTOR
PAUSE 8
21-30.XL-R5020BK_f 02.5.28, 11:32 AM22