Filter
Top Products
MasterPage: Advan_Heading0_Right
DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
EN 29
Interval Shooting
During Interval Shooting mode, the camcorder
continues to take snapshots automatically with
an interval of your desired setting.
1 Set “INT.SHOT” to “ON”. (੬ pg. 37, 41)
● “INTERVAL” and “ ” appear.
2 Set “INT.TIME” to the desired shooting
interval. (੬ pg. 37, 41)
3 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
4 Press SNAPSHOT.
● First shot is taken after 2 seconds.
● The “O” indicator appears while the snapshot
is being taken.
● The clock icon “ ” turns while waiting for the next
shot is being taken.
● The next shot is being taken automatically when
the shooting interval set in step 2 has passed.
5 Press SNAPSHOT to stop Interval Shooting.
To cancel Interval Shooting mode
Set “INT.SHOT” to “OFF” in step 1.
NOTES:
● To distinguish between still images taken in
Interval Shooting mode and other still images, it is
recommended that you reset the file names before
shooting. (੬ pg. 33)
● Interval Shooting will stop if the battery runs out of
power or the Memory Card becomes full.
● The function “Animation” in the provided software
“Digital Photo Navigator” can be used to create
movie files from the captured still images
(Windows
®
only). To create movie files with the
Macintosh, it is recommended that you use the
function “Creating a Slideshow From Still Images”
in the commercial software “QuickTime Pro”.
Images shot with the camcorder are
automatically numbered, then stored in
numerical order in the memory card. You can
view the stored images, one at a time, much like
flipping through a photo album.
1 Load a memory card. (੬ pg. 18)
2 Set the VIDEO/MEMORY Switch to
“MEMORY”.
3 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
● The type of file (IMAGE or E-MAIL CLIP) which
has been played back at the last time is displayed.
4 If the video clip playback (E-MAIL CLIP,
੬ pg. 30) screen appears, press SEL. The
MEMORY SELECT screen appears.
5 Press or to select “IMAGE”, and press
SET. The image playback screen (IMAGE)
appears.
6 Press < to display the previous file. Press > to
display the next file.
NOTE:
Images shot and stored on the card with another
device with resolutions other than “640 x 480” and
“1024 x 768” will be displayed as thumbnails only.
These thumbnail images cannot be transferred to a
PC.
Playback Zoom
Available only with the remote control.
(੬ pg. 26)
Normal Playback Of Images
Power Switch
Lock Button
MENU
VIDEO/
MEMORY
<>
SEL
SET
D.S.C. PLAYBACK
GR-DF570_470PAL.book Page 29 Monday, January 17, 2005 8:27 PM