JVC GR-DF470 MP3 Player User Manual


 
EN 25
VIDEO PLAYBACK
MasterPage: Start_Right
VIDEO RECORDING & PLAYBACK
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(pg. 26)
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
1 Pull out the battery
holder by pushing the lock
tab.
2 Insert the battery in the
holder, and be sure to
have the “+” mark visible.
3 Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam’s
approximate effective
distance for indoor use is
5m.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
A Infrared beam transmitting window
Transmits the beam signal.
The following buttons are available only when
the camcorder’s Power Switch is set to “PLAY”.
B PAUSE Button
Pauses the tape (pg. 26)
Up Button (pg. 27)
C SLOW Rewind Button (pg. 26)
D REW Button
Rewind/Reverse Shuttle Search on a tape
(pg. 22)
Displays previous file in a memory card
(pg. 29)
Left Button (pg. 27)
E INSERT Button (pg. 56)
F SHIFT Button (pg. 27)
G DISPLAY Button (pg. 23, 52)
H SLOW Forward Button (pg. 26)
I PLAY Button
Starts Playback of a tape (pg. 22)
Starts Auto Playback of images in a memory
card (pg. 30)
J FF Button
Forward/Forward Shuttle Search on a tape
(pg. 22)
Displays next file in a memory card (pg. 29)
Right Button (pg. 27)
K A. DUB Button (pg. 55)
L STOP Button
Stops the tape (pg. 22)
Stops Auto Playback (pg. 30)
Down Button (pg. 27)
M EFFECT Button (pg. 27)
N EFFECT ON/OFF Button (pg. 27)
Playback Using The Remote
Control
1
1
2
3
3
Lock tab
Remote sensor
CONTINUED ON NEXT PAGE
GR-DF570_470PAL.book Page 25 Monday, January 17, 2005 8:27 PM