Jensen JMC-255 MP3 Player User Manual


 
7
CD OPERATION
THIS PLAYER PLAYS NOT ONLY COMMERCIAL CD’S BUT ALSO CD-RW DISCS.
Because of non-standardized format definition/production of CD-R/RW,
playback quality & performance are not guaranteed.
Manufacturer is not responsible for the playability of CD-R/RW due to
recording conditions such as PC performance, writing software, media
ability, etc.
Do not attach a label or seal to either side of the CD-R/RW disc. It may
cause a malfunction.
Note: If skipping occurs during CD playing, try turning the volume down.
Do not open the CD DOOR when CD is playing.
1. Open the CD DOOR by pressing the CD DOOR at the “PUSH OPEN” mark
located on the CD door.
2. Insert a CD disc into the CD Compartment with the label facing up and
close the CD DOOR.
Note: Ensure the CD DOOR is closed properly and locked in place.
3. Set the FUNCTION SWITCH to the “CD” position.
4. Press the POWER BUTTON once. The
Player will start reading the CD.
The total number of tracks on the disc
will be shown in the LCD DISPLAY after
a few seconds.
Note:
i. If there is no disc inside, “
” will be
shown in the LCD DISPLAY.
ii. If the CD DOOR is not closed, the LCD
DISPLAY will show “
”.
Play/Pause Mode
5. When the PLAY/PAUSE "# BUTTON
is pressed during CD stop mode, the first
track will be played. The Play Indicator “
"
will be shown in the LCD DISPLAY. The LCD
DISPLAY will show the specific number of
track being played.