IRiver iFP-500 Series MP3 Player User Manual


 
4-21
SOUND
EQ LIMIT
ON : Limit the control of equalizer frequency
to prevent distortion of sound.
OFF : You can enjoy the original sound
though distortion of sound may occur.
SOUND
EQ SELECT
You can select various EQ mode.
Press NAVI/MENU button after selecting
EQ by using
or .
EQ SELECT
ROCK JAZZ
CLASSIC U BASS
METAL Xtrm EQ
Xtrm 3D
The Xtreme 3D button will activate even
if Xtrm 3D is not selected.
SOUND BALANCE
Balance your sound to the right or left or keep
it in the center according to your preference.
When Sound Balance bar is moved to L (Left,
20),the sound outputs at the left earphone.
When the lever is moved to R (Right, 20) the
sound outputs at the right earphone. The
default value is 0 and the sound outputs the
same level at both earphones.
NOTE
4-22
Xtreme 3D
(Natural)
1
DBE 3D EQ
Xtreme 3D
You can adjust the level of 3D
sound(minimum, Natural, and Maximum).
You can extend 3D sound by selecting
Bass Boost or 3D EQ. You can also adjust
the level of 3D sound with the
or
lever. Select DBE or 3D EQ with the
Navi/Menu button.
DBE setting
You can select the Bass Center Band level
fromBand1to4.YoucanalsosettheBass
Boost gain from 0 dB to 15dB by 3dB step.
DBE setting
(bass center band)
12 dB
band 3
3D EQ setting
You can adjust the sound to your
preference.
There are 5 band frequency steps, set
from -12dB to +12dB by 3dB step.
The way of setting 3D EQ is similar to that of setting Xtreme 3D.
NOTE