Filter
Top Products
17
NS-VDVD1 Vertical DVD player
www.insignia-products.com
Using the player
Playing DVDs and CDs
To play a disc:
1 Turn your TV on and select the video input from the player.
2 Press POWER on the back of the player.
3 Press the VOLUME buttons to adjust volume (including when
using headphones).
4 Hold the edges of the disc and place the disc into the disc slot with
the label facing left. The disc should automatically start playback.
If the disc does not automatically start playback, press Play.
If the disc starts playback with a menu, use the direction buttons to
select menu options, then press Play.
5 Remove the disc and turn off the player.
To pause a disc playing a movie:
1 When playing a DVD, press / Pause/Step to make
playback pause.
2 Pressing / again advances the picture one frame at a time.
3 Press Play to resume normal playback.
To pause a disc playing music:
1 When playing a CD, press / Pause/Step to make playback
pause.
2 Press Play to resume normal playback.
To go to the next or previous chapter:
1 When playing a DVD, press (PREV) to go back to the start of
the chapter.
2 Press (PREV) again to go to the previous chapter.
3 Press (NEXT) to go to the next chapter.
To use fast forward or fast reverse:
1 When playing a DVD, press F.FWD to fast forward through
the disc. Each time F.FWD is pressed, the speed increases.
2 Press F.REV to fast reverse through the disc. Each time
F.REV is pressed, the speed increases.
3 Press Play to resume normal playback.
Note
Do not place an unplayable disc into the player.