Filter
Top Products
7
Insignia NS-CLVR01 Clock Radio with Voice Command
www.insigniaproducts.com
Back view
Setting up your clock radio
Installing the backup batteries
The clock radio uses a backup battery system to maintain clock and
alarm settings in the event of a power failure. If the backup batteries
have been installed and a power failure occurs or the AC cord is
accidentally disconnected, the display will not remain lit, but the
current time and alarm time settings (the alarm will not sound) will be
temporarily maintained. Otherwise, you must reset the time and alarm
settings.
# Feature Description
1 DC in jack Connect the AC power adapter here.
2 AUX in jack Connect a cable from an external audio source to this jack
to hear the sound through your clock radio.
3 FM antenna (wire) Uncoil and extend this wire antenna to improve FM radio
reception.
4 Dimmer button Press to adjust the backlight of the LCD.
5 Time set button Press and hold to enter the time set mode.
6 Hour button Press to set the hour.
7 Minute button Press to set the minutes.
8 Alarm 1 button Press and hold to select Alarm 1 and change the setting.
9 Alarm 2 button Press and hold to select Alarm 2 and change the setting.
10 VC ON/OFF button Press turn the voice command function on or off.
NS-CLVR01_10-0138_MAN_ENG_V2.fm Page 7 Tuesday, February 2, 2010 3:04 PM