Filter
Top Products
CONTROLLING YOUR TV WITH THE VCR'S REMOTE CONTROL
54
CONTROLLING THE TV
Once programmed, the VCR's remote control is ready to control the TV.
1
First press TV button to change to the TV function mode, them press the button of the
TV function that you want.
For example;
Press TV button and the CHANNEL ( ), and the TV station will change to the next
higher station.
2
Press VCR button to operate your VCR with the remote again.
Note:
Be aware that not all of your TV's functions may work even though the remote control is
correctly programmed.
REMOTE CONTROL OF THE CABLE CONVERTER
If you have a cable converter, you will probably want to program you VCR's remote
control so you can easily change channels. The process is the same as for
programming the remote to operate your TV. For additional details see the previous
page.
1
Hold down the CATV button and press the number of your brand of cable box (shown in
the chart below).
Note:
If that button combination does not work, or if your brand is not on the chart, just go
through all the button combinations until you find the one that works best.
Cable Converters Press CATV and This Number
Jerrold 1 1