Filter
Top Products
CONTROLLING VCR INPUT & OUTPUT
18
2. Press VCR/TV button on the editing VCR so that VCR appears on the display.
USING A CABLE CONVERTER BOX
If your cable service supplies you with a cable converter box, you can use the basic
connection shown below.
See Cable Converter Diagram.
NOTES:
With this connection, you CANNOT record one program and while viewing another.
Channel memory programming is NOT needed when using this connection.
TO RECORD AND VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL.
1. Press VCR/TV button on the remote control so that "VCR" appears on the display.
2. Set the TV channel to the some video output channel as located on the back of the
VCR (Ch3 or 4).
3. Set the VCR channel selector to the output channel of the Cable Converter Box.
(Example: CH 3)
4. Select the channel to be recorded at the Cable Converter Box.
CONTROLLING VCR INPUT & OUTPUT
VIDEO OUTPUT CHANNEL SETTING (BACK OF VCR)
When the VCR is in the Playback mode, or when the VCR/TV button is in the VCR
position, you TV will receive the signals from the VCR on either channel 3 or 4. Set the
3CH/4CH selector switch to the station that is not used for normal broadcasts in your
area; then set your TV to that same channel when viewing from the VCR.