Filter
Top Products
VIEWING ONLY TV (WITHOUT RECORDING)
43
Press VCR/TV button on remote control so that "VCR" appears on the display.
NOTE: The VCR will continue recording until the preset end time is reached or the tape
runs out.
VIEWING ONLY TV (WITHOUT RECORDING)
The VCR must be plugged into an AC outlet.
1
Turn VCR power off or press VCR/TV button on the remote control to select TV, so that
"VCR" disappears from the display.
2
Turn on the TV and select the channel you want to watch.
For viewing only TV, the VCR may be turned on or off, once "VCR" has been removed
from the display.
PLAYBACK
1
Turn on the TV and set the TV channel to the same video output channel as located on
the back of the VCR. (CH 3 or 4)
2
Insert a tape. VCR will automatically turn on. Press PLAY button.
(If the erase-protection tab has been removed, the VCR will start playback
automatically.)
3a
If a tape is already in the VCR, press PLAY button on the VCR. Power will turn on
and playback will start automatically. (Direct Button Operation)
3b
If a tape is already in the VCR, press POWER button to turn on, and then press
PLAY button on the remote control.