Filter
Top Products
Remote Control Buttons
Remote Control Illustration
POWER Turns the VCR on and off
GUIDE Brings up an on-screen setup and programming guide, the Easy
Guide System.
DISPLAY Used in on-screen programming and indexing.
CLEAR Used in on-screen programming and indexing.
VCR/TV Switches between viewing through the VCR and not viewing
through the VCR.
VOLUME Increase or decrease the audio volume.
MUTE Turns off the audio until you press MUTE again.
REW Rewinds the videotape.
PLAY Starts playing a loaded videocassette.
REC Starts recording on the station the VCR is set to.
VCR, TV, CATV (MODE SELECT) Device buttons let you set the remote to
control one of the three devices.
0 to 9 Number buttons used in on-screen programming. Can also be used
to change channels. (Simply press 2 or 3 digits for the channel you want -
such as 0 and 6 for channel 6, or 100/ENT and 2 and 4 for channel 124.)
AVX Used for recording from an auxiliary input such as a stereo system.
CHANNEL Top button switches to next higher channel, bottom button
switches to the next lower channel. For these to operate, you must have
preset your channels.
PAUSE Temporarily stops the cassette from recording or playing. Press
PAUSE again (or PLAY) to resume.
F.FWD Fast forwards the videotape.